Acrylic System Product category
Wood Coatings & Finishes
Lacquers, sealers, stains and topcoats for wood
BMA's wood range covers 37 products across eight systems: nitrocellulose, polyurethane, polyester, epoxy, acrylic, synthetic and water-based, plus stains and special products.
The nitrocellulose and polyurethane systems are specified for wood furniture, chairs and frames, wooden floors, bars and kitchen bench tops, bathroom vanities, doors and window frames, industrial floors, and wooden decorative items. The polyurethane system is two-pack, mixed at 50% hardener by volume; the epoxy system at 25%.
18 of the 37 products have a technical data sheet. Every specification on this page comes from those sheets, and products without one carry no specification.
- ISO certified
- 46 years manufacturing
- Exported to 30+ countries
Coating systems
Explore the wood coating systems
8 systems. Pick a system to see its full range.
Acrylic System
2 productsData sheets shared with other categories; no wood application stated on file. 1 of 2 products in this system has no data sheet.
View systemEpoxy System
4 productsData sheets shared with other categories; no wood application stated on file. 1 of 4 products in this system has no data sheet.
View systemNC System
7 productsSpecified for wood furniture, chairs and frames, wooden floors, bars and kitchens bench tops. 1 of 7 products in this system has no data sheet.
View systemPolyester System
5 products5 products: Polyester Hardener, Polyester Lacquer, Polyester Putty, Polyester Primer, Polyester Sealer. No technical data sheet on file for this system.
View systemPU System
6 productsTwo-pack, mixed at 50% hardener by volume. Specified for bars and kitchens bench tops; wooden frames, panels, and furniture; wood furniture; bathrooms vanities. 2 of 6 products in this system have no data sheet.
View systemStains & Special Products
4 productsSpecified for fiber and particle board; wooden windows frames, doors and furniture; kitchens; windows and doors frames. 1 of 4 products in this system has no data sheet.
View systemSynthetic System
4 productsSpecified for wood primed surfaces, gypsum surfaces, concrete and plastered walls, steel structures. 3 of 4 products in this system have no data sheet.
View systemWB (Water-Based) System
5 products5 products: WB Lacquers, WB Paints, WB Pastes, WB Sealers, WB Stains. No technical data sheet on file for this system.
View systemFull range
Wood coatings
All 37 products in this category — download a technical data sheet or add items to your quote request.
Acrylic System
Epoxy SystemEpoxy Hardener
Epoxy SystemLacquer Epoxy
Gloss 90% · 3 hours touch dry
Epoxy SystemPaint Epoxy
Gloss 80% · 2 hours touch dry
Epoxy SystemPrimer Epoxy
Matt · 2 hours touch dry
NC SystemNC Craquelet
Gloss 80–90% · 20 minutes touch dry
NC SystemNC Lacquer
multiple variants · 10 to 20 minutes touch dry
NC SystemNC Paint
Available in all gloss levels · 60 minutes touch dry
NC SystemNC Primer
15 minutes touch dry
NC SystemNC Paste
NC SystemNC Putty
30 minutes touch dry
NC SystemNC Sealer
10 to 15 minutes touch dry
Polyester SystemPolyester Hardener
Polyester SystemPolyester Lacquer
Polyester SystemPolyester Putty
PU SystemPU Hardener
Polyester SystemPolyester Primer
Polyester SystemPolyester Sealer
PU SystemPU Isulator
PU SystemPU Lacquer
multiple variants · 30 minutes touch dry
PU SystemPU Paint
Glossy / Demi-Matt / Matt · 1 hour touch dry
PU SystemPU Sealer
30 minutes touch dry
Stains & Special ProductsBouchepore
Matt · 30 minutes touch dry
Stains & Special ProductsGlue
Stains & Special ProductsUniversal Stains
30 minutes touch dry
Stains & Special ProductsVarnish
Available in multiple gloss levels · 3 hours touch dry
Synthetic SystemSynthetic Enamel
Available in all gloss levels · 4 hours touch dry
Synthetic SystemSynthetic Paints
Synthetic SystemSynthetic Paste
Synthetic SystemSynthetic Primer
WB (Water-Based) SystemWB Lacquers
WB (Water-Based) SystemWB Paints
WB (Water-Based) SystemWB Pastes
WB (Water-Based) SystemWB Sealers
WB (Water-Based) SystemWB Stains
PU SystemPU Primer
15 minutes touch dry
Acrylic SystemAcrylic Paint
30 minutes touch dryAt a glance
Compare wood coating products
Compare finish, dry time, coverage and film thickness side by side, and open the technical data sheet on any row.
| Product | System | Finish | Touch dry | Recoat | Theoretical spreading rate (m²/L) | Dry film (µm) | Solids by vol. | VOC (g/L) | Data sheet |
|---|---|---|---|---|---|---|---|---|---|
| Lacquer Epoxy | Epoxy System | Gloss 90% | 3 hours | 6 to 8 hours | 7.64-9.55 | 60-75 | 57.3 | 416.2 | |
| Paint Epoxy | Epoxy System | Gloss 80% | 2 hours | 10 to 24 hours | 10.66-12.8 | 50-60 | 64 | 363.92 | |
| Primer Epoxy | Epoxy System | Matt | 2 hours | 10 to 24 hours | 7.11-12.8 | 50-90 | 64.04 | 318.89 | |
| NC Craquelet | NC System | Gloss 80–90% | 20 minutes | 2 hours | 17.5-22.5 | 35-45 | 20 | 715 | |
| NC Lacquer | NC System | multiple variants | 10 to 20 minutes | 2 hours | multiple variants | multiple variants | multiple variants | multiple variants | |
| NC Paint | NC System | Available in all gloss levels | 60 minutes | — | 8.75-11.66 | 30-40 | 35 | 450 | |
| NC Primer | NC System | — | 15 minutes | 2 hours | 8.88-11.42 | 35-45 | 40 | 536.07 | |
| NC Putty | NC System | — | 30 minutes | — | 4.16-5.83 | 25-35 | 60 | 376.55 | |
| NC Sealer | NC System | — | 10 to 15 minutes | 3 hours | 16.71-20 | 25-30 | 50.13 | 464.18 | |
| PU Lacquer | PU System | multiple variants | 30 minutes | 12 hours | multiple variants | 30-50 | multiple variants | multiple variants | |
| PU Paint | PU System | Glossy / Demi-Matt / Matt | 1 hour | 24 hours | — | 35-50 | multiple variants | multiple variants | |
| PU Sealer | PU System | — | 30 minutes | — | 8.4-16.8 | 25-50 | 42 | 533.71 | |
| Bouchepore | Stains & Special Products | Matt | 30 minutes | — | — | 25-40 | 45 | 425.82 | |
| Universal Stains | Stains & Special Products | — | 30 minutes | 4 hours | — | — | 47 | 344.95 | |
| Varnish | Stains & Special Products | Available in multiple gloss levels | 3 hours | — | 9.8-12.25 | 40-50 | 49 | 474.79 | |
| Synthetic Enamel | Synthetic System | Available in all gloss levels | 4 hours | 24 hours | 9.5-19 | 30-60 | 57-59 | 350-450 | |
| PU Primer | PU System | — | 15 minutes | 12 hours | 10.68-17.8 | 30-50 | 53.4 | 424.27 | |
| Acrylic Paint | Acrylic System | — | 30 minutes | 8 to 12 hours | 10.08-16.8 | 30-50 | 50.42% | 418.4 |
- Lacquer Epoxy
- System
- Epoxy System
- Finish
- Gloss 90%
- Touch dry
- 3 hours
- Recoat
- 6 to 8 hours
- Theoretical spreading rate (m²/L)
- 7.64-9.55
- Dry film (µm)
- 60-75
- Solids by vol.
- 57.3
- VOC (g/L)
- 416.2
- Paint Epoxy
- System
- Epoxy System
- Finish
- Gloss 80%
- Touch dry
- 2 hours
- Recoat
- 10 to 24 hours
- Theoretical spreading rate (m²/L)
- 10.66-12.8
- Dry film (µm)
- 50-60
- Solids by vol.
- 64
- VOC (g/L)
- 363.92
- Primer Epoxy
- System
- Epoxy System
- Finish
- Matt
- Touch dry
- 2 hours
- Recoat
- 10 to 24 hours
- Theoretical spreading rate (m²/L)
- 7.11-12.8
- Dry film (µm)
- 50-90
- Solids by vol.
- 64.04
- VOC (g/L)
- 318.89
- NC Craquelet
- System
- NC System
- Finish
- Gloss 80–90%
- Touch dry
- 20 minutes
- Recoat
- 2 hours
- Theoretical spreading rate (m²/L)
- 17.5-22.5
- Dry film (µm)
- 35-45
- Solids by vol.
- 20
- VOC (g/L)
- 715
- NC Lacquer
- System
- NC System
- Finish
- multiple variants
- Touch dry
- 10 to 20 minutes
- Recoat
- 2 hours
- Theoretical spreading rate (m²/L)
- multiple variants
- Dry film (µm)
- multiple variants
- Solids by vol.
- multiple variants
- VOC (g/L)
- multiple variants
- NC Paint
- System
- NC System
- Finish
- Available in all gloss levels
- Touch dry
- 60 minutes
- Recoat
- —
- Theoretical spreading rate (m²/L)
- 8.75-11.66
- Dry film (µm)
- 30-40
- Solids by vol.
- 35
- VOC (g/L)
- 450
- NC Primer
- System
- NC System
- Finish
- —
- Touch dry
- 15 minutes
- Recoat
- 2 hours
- Theoretical spreading rate (m²/L)
- 8.88-11.42
- Dry film (µm)
- 35-45
- Solids by vol.
- 40
- VOC (g/L)
- 536.07
- NC Putty
- System
- NC System
- Finish
- —
- Touch dry
- 30 minutes
- Recoat
- —
- Theoretical spreading rate (m²/L)
- 4.16-5.83
- Dry film (µm)
- 25-35
- Solids by vol.
- 60
- VOC (g/L)
- 376.55
- NC Sealer
- System
- NC System
- Finish
- —
- Touch dry
- 10 to 15 minutes
- Recoat
- 3 hours
- Theoretical spreading rate (m²/L)
- 16.71-20
- Dry film (µm)
- 25-30
- Solids by vol.
- 50.13
- VOC (g/L)
- 464.18
- PU Lacquer
- System
- PU System
- Finish
- multiple variants
- Touch dry
- 30 minutes
- Recoat
- 12 hours
- Theoretical spreading rate (m²/L)
- multiple variants
- Dry film (µm)
- 30-50
- Solids by vol.
- multiple variants
- VOC (g/L)
- multiple variants
- PU Paint
- System
- PU System
- Finish
- Glossy / Demi-Matt / Matt
- Touch dry
- 1 hour
- Recoat
- 24 hours
- Theoretical spreading rate (m²/L)
- —
- Dry film (µm)
- 35-50
- Solids by vol.
- multiple variants
- VOC (g/L)
- multiple variants
- PU Sealer
- System
- PU System
- Finish
- —
- Touch dry
- 30 minutes
- Recoat
- —
- Theoretical spreading rate (m²/L)
- 8.4-16.8
- Dry film (µm)
- 25-50
- Solids by vol.
- 42
- VOC (g/L)
- 533.71
- Bouchepore
- System
- Stains & Special Products
- Finish
- Matt
- Touch dry
- 30 minutes
- Recoat
- —
- Theoretical spreading rate (m²/L)
- —
- Dry film (µm)
- 25-40
- Solids by vol.
- 45
- VOC (g/L)
- 425.82
- Universal Stains
- System
- Stains & Special Products
- Finish
- —
- Touch dry
- 30 minutes
- Recoat
- 4 hours
- Theoretical spreading rate (m²/L)
- —
- Dry film (µm)
- —
- Solids by vol.
- 47
- VOC (g/L)
- 344.95
- Varnish
- System
- Stains & Special Products
- Finish
- Available in multiple gloss levels
- Touch dry
- 3 hours
- Recoat
- —
- Theoretical spreading rate (m²/L)
- 9.8-12.25
- Dry film (µm)
- 40-50
- Solids by vol.
- 49
- VOC (g/L)
- 474.79
- Synthetic Enamel
- System
- Synthetic System
- Finish
- Available in all gloss levels
- Touch dry
- 4 hours
- Recoat
- 24 hours
- Theoretical spreading rate (m²/L)
- 9.5-19
- Dry film (µm)
- 30-60
- Solids by vol.
- 57-59
- VOC (g/L)
- 350-450
- PU Primer
- System
- PU System
- Finish
- —
- Touch dry
- 15 minutes
- Recoat
- 12 hours
- Theoretical spreading rate (m²/L)
- 10.68-17.8
- Dry film (µm)
- 30-50
- Solids by vol.
- 53.4
- VOC (g/L)
- 424.27
- Acrylic Paint
- System
- Acrylic System
- Finish
- —
- Touch dry
- 30 minutes
- Recoat
- 8 to 12 hours
- Theoretical spreading rate (m²/L)
- 10.08-16.8
- Dry film (µm)
- 30-50
- Solids by vol.
- 50.42%
- VOC (g/L)
- 418.4
Two-pack mixing data — seven products require a hardener
| Product | Hardener by volume | Induction | Pot life | Thinner |
|---|---|---|---|---|
| Lacquer Epoxy | 25% | 10 min | 2 hrs | BMA Thinner Epoxy |
| Paint Epoxy | 25% | 10 min | 2 hrs | BMA Thinner Epoxy |
| Primer Epoxy | 25% | 10 min | 2 hrs | BMA Thinner Epoxy |
| PU Lacquer | 50% | 5-8 min | 60 min | see data sheet |
| PU Paint | 50% | 5-8 min | 1 hr | BMA Thinner PU |
| PU Sealer | 50% | 2-3 min | 30 min | BMA Thinner PU |
| PU Primer | 50% | 3-5 min | 1 hr | BMA Thinner PU |
VOC
View all EcoBMA →VOC content across the range
Volatile organic compound content, as stated on each product's technical data sheet.
| Product | VOC (g/L) |
|---|---|
| Primer Epoxy | 318.89 |
| Universal Stains | 344.95 |
| Synthetic Enamel | 350-450 |
| Paint Epoxy | 363.92 |
| NC Putty | 376.55 |
| Lacquer Epoxy | 416.2 |
| Acrylic Paint | 418.4 |
| PU Primer | 424.27 |
| Bouchepore | 425.82 |
| NC Paint | 450 |
| NC Sealer | 464.18 |
| Varnish | 474.79 |
| PU Sealer | 533.71 |
| NC Primer | 536.07 |
| NC Craquelet | 715 |
| NC Lacquer | multiple variants |
| PU Lacquer | multiple variants |
| PU Paint | multiple variants |
Keep exploring
Related categories
Overlapping chemistries — worth a look if you're specifying across surfaces.
Common questions
Common questions
Theoretical spreading rates are NC Craquelet 17.5-22.5 m²/L; NC Paint 8.75-11.66 m²/L; NC Primer 8.88-11.42 m²/L; NC Putty 4.16-5.83 m²/L; NC Sealer 16.71-20 m²/L; PU Sealer 8.4-16.8 m²/L; PU Primer 10.68-17.8 m²/L. These are theoretical rates at the recommended dry film thickness.
NC Craquelet is gloss 80–90%; NC Paint is available in all gloss levels; PU Paint is glossy / demi-matt / matt; Lacquer Epoxy is gloss 90%; Paint Epoxy is gloss 80%; Primer Epoxy is matt; Bouchepore is matt; Varnish is available in multiple gloss levels.
PU Lacquer, PU Paint, PU Sealer, PU Primer, Lacquer Epoxy, Paint Epoxy, Primer Epoxy are two-pack products, mixed at 25% or 50% hardener by volume. Allow the stated induction time before applying, and use the mixture within its pot life.
18 of the 37 products in this category have a technical data sheet on file, and each states ISO 9001:2015, ISO 45001:2018 and ISO 14001:2015. The remaining 19 carry no certification record here.
Request a quote for wood coatings
Tell us your project and volumes — our export team replies with pricing and lead times.