NC Putty BMA-PUN
Closes off, patches and fills surface imperfections (cracks, holes, pores, etc.) on new wood.
BMA Nitrocellulose (NC) Putty
BMA Nitrocellulose (NC) Cracquelet is a one-component, nitrocellulose-modified oil-based alkyd resin. It is a quick-drying topcoat with high durability, yellowing resistance, excellent hardness and adhesion to the surface. It is a fast-drying nitrocellulose wood clear or pigmented lacquer with a cracking effect finish.
Data for BMA NC Cracquelet Clear
| Parameter | Norm / standard | Result |
|---|---|---|
| Total Solids, by weight (%) | ASTM D1259 | 25 |
| Total Solids, by volume (%) | ISO 3233 | 20 |
| Viscosity at 25 °C (Poises) | ASTM D562 | 15 |
| Specific Gravity (g/cm³) | ASTM D1475 | 0.99 |
| Total Volatile Organic Compound (VOC) (g/L) | ASTM D3960 | 715 |
| Appropriate solvent | — | BMA Thinner Super |
| Solvent ratio by volume (%) | — | 20–35 |
| Gloss Level (%) | — | 80–90 |
| Parameter | Norm / standard | Result |
|---|---|---|
| Recommended WFT (µm) | — | 175–225 |
| Recommended DFT (µm) | — | 35–45 |
| Theoretical Spreading Rate (m²/L) | — | 17.5–22.5 |
Before applying BMA NC Cracquelet, carry out all necessary pretreatment. The surface should be clean, dry and free of all contaminants (oils, dust, dirt, etc.) to avoid the risk of surface failure.
For previously painted wooden surfaces, remove paint residues with a scraper to avoid flaking of the new coating in case it is not compatible with the old one. Sand and smooth the surface, then clean it well and remove the sanding dust. Let the surface dry before any primer application. For new wood, sand the surface and all edges lightly until smooth. Apply BMA insulator for oily wooden substrates. Then use NC Putty BMA-PUN to close off, patch and fill all surface imperfections (cracks, holes, pores, etc.). Clean the substrate, let it dry, and make sure the moisture content does not exceed 10%.
For air-spray application, 20–35% thinner can be added to BMA NC Cracquelet.
Apply BMA NC Cracquelet in a well-ventilated area where the relative humidity does not exceed 85% and the temperature is at least 10 °C. The surface should be clean, dry and free of all contaminants before BMA NC Cracquelet is applied with a brush, roller or air-spray system.
The products this coating is specified alongside in the data sheet.
Closes off, patches and fills surface imperfections (cracks, holes, pores, etc.) on new wood.
BMA Nitrocellulose (NC) PuttyApplied on oily wooden substrates.
Store in undamaged, unopened containers. The product must be kept away from direct sunlight and any sources of heat or flame.
Contains volatile organic compounds (VOCs); avoid release into the environment. Dispose of in accordance with local environmental regulations. Prevent contamination of soil and waterways.
Harmful by inhalation, skin contact, and if swallowed. May cause allergic skin reactions, respiratory irritation, or eye damage. Prolonged exposure may affect the central nervous system.
Use only in well-ventilated areas. Wear appropriate personal protective equipment (PPE) including gloves, goggles, and a respirator. Avoid direct contact with skin and eyes. Do not eat, drink, or smoke while using the product.
Inhalation: Move to fresh air; seek medical attention if symptoms persist. Skin Contact: Wash immediately with soap and water. Remove contaminated clothing. Eye Contact: Rinse cautiously with water for several minutes. Seek medical advice. Ingestion: Do not induce vomiting. Rinse mouth and seek immediate medical assistance.
The theoretical spreading rate is 17.5–22.5 m² per liter at the recommended dry film thickness of 35–45 µm.
Apply it in a well-ventilated area, with humidity no higher than 85%, and at a temperature of at least 10 °C.
Tell us your project and volumes — our export team replies with pricing and lead times.