BMA Sealer
2 to 3 layers after the wood stain, sanded with 300-grit sandpaper.

BMA Nitrocellulose (NC) Lacquer is a one-component, nitrocellulose-modified oil-based resin. It is a quick-drying clear topcoat with high durability, excellent hardness and adhesion to the surface.
Data for BMA NC Lacquer. Column headers printed as product codes LNN0200 (NC Lacquer Glossy), LNN0210 (NC Lacquer Demi Matt), LNN0217 (NC Lacquer 30% Glossy), LNN0220 (NC Lacquer Matt).
| Parameter | Norm / standard | Glossy | Demi-Matt | 30% Glossy | Matt |
|---|---|---|---|---|---|
| Total Solids, by weight (%) | ASTM D1259 | 41 | 26 | 30 | 30 |
| Total Solids, by volume (%) | ISO 3233 | 37.3 | 28.9 | 27.3 | 27.3 |
| Viscosity at 25 °C (Poises) | ASTM D562 | 30 | 35 | 30 | 50 |
| Specific Gravity (g/cm³) | ASTM D1475 | 1.0 ± 0.1 | 0.9 ± 0.1 | 1.0 ± 0.1 | 1.0 ± 0.1 |
| Total Volatile Organic Compound (VOC) (g/L) | ASTM D3960 | 585 | 695 | 664 | 664 |
| Appropriate solvent | — | Thinner super | Thinner super | Thinner super | Thinner super |
| Solvent ratio by volume (%) | — | 25–35 | 25–35 | 25–35 | 25–35 |
| Gloss Level (%) | — | 80 | 50 | 30 | 10 |
| Parameter | Norm / standard | Glossy | Demi-Matt | 30% Glossy | Matt |
|---|---|---|---|---|---|
| Recommended WFT (µm) | — | 80–110 | 120–145 | 145–185 | 145–185 |
| Recommended DFT (µm) | — | 30–40 | 35–45 | 40–50 | 40–50 |
| Theoretical Spreading Rate (m²/L) | — | 9.3–12.4 | 6.42–8.25 | 5.46–6.825 | 5.46–6.825 |
Before applying BMA NC Lacquer, carry out all necessary pretreatment. The surface should be clean, dry and free of all contaminants (oils, dust, dirt, etc.) to avoid the risk of surface failure.
For previously painted wooden surfaces, remove paint residues with a scraper to avoid flaking of the new coating in case it is not compatible with the old one. Sand and smooth the surface, then clean it well and remove the sanding dust. Let the surface dry before any sealer application. For new wood, sand the surface and all edges lightly until smooth. Apply BMA insulator for oily wooden substrates. Then use BMA bouche-pores to close off, patch and fill all surface imperfections (cracks, holes, pores, etc.). Clean the substrate, let it dry, and make sure the moisture content does not exceed 10%. Apply BMA Wood Stain 1BM-STS, then 2 to 3 layers of BMA Sealer. Sand until smooth using 300-grit sandpaper. Clean well before any coating application.
Prime with BMA NC Sealer directly after preparing, cleaning and drying the surface.
For air-spray application, 25–35% thinner can be added to BMA NC Lacquer.
Apply BMA NC Lacquer in a well-ventilated area where the relative humidity does not exceed 70% and the temperature is at least 10 °C. The surface should be clean, dry and free of all contaminants before BMA NC Lacquer is applied with an air-spray system.
The products this coating is specified alongside in the data sheet.
2 to 3 layers after the wood stain, sanded with 300-grit sandpaper.
Used for priming directly after preparing, cleaning and drying the surface.
Closes off, patches and fills surface imperfections (cracks, holes, pores, etc.) on new wood.
BMA Bouche-PoresApplied on oily wooden substrates.
Applied on new wood before the sealer layers.
BMA Wood StainStore in undamaged, unopened containers. The product must be kept away from direct sunlight and any sources of heat or flame.
Contains volatile organic compounds (VOCs); avoid release into the environment. Dispose of in accordance with local environmental regulations. Prevent contamination of soil and waterways.
Harmful by inhalation, skin contact, and if swallowed. May cause allergic skin reactions, respiratory irritation, or eye damage. Prolonged exposure may affect the central nervous system.
Use only in well-ventilated areas. Wear appropriate personal protective equipment (PPE) including gloves, goggles, and a respirator. Avoid direct contact with skin and eyes. Do not eat, drink, or smoke while using the product.
Inhalation: Move to fresh air; seek medical attention if symptoms persist. Skin Contact: Wash immediately with soap and water. Remove contaminated clothing. Eye Contact: Rinse cautiously with water for several minutes. Seek medical advice. Ingestion: Do not induce vomiting. Rinse mouth and seek immediate medical assistance.
Apply it in a well-ventilated area, with humidity no higher than 70%, and at a temperature of at least 10 °C.
Tell us your project and volumes — our export team replies with pricing and lead times.