BMA Bouche-Pores container

BMA Bouche-Pores

Product code 1BM-BPW·Catalog name: Bouchepore

BMA Bouche-Pores is a fast-drying, solvent-based wood coating formulated to be used on all soft and hard woods as a durable pore filling coating.

Brush

ISO 9001:2015 · ISO 45001:2018 · ISO 14001:2015

Key specifications

Dry film25–40µm recommended
Touch dry30 minsurface touch dry
VOC425.82g/L

What it's used for

BMA Bouche-Pores can be used on any wooden surface.

About BMA Bouche-Pores

BMA Bouche-Pores is a fast-drying, solvent-based wood coating formulated to be used on all soft and hard woods as a durable pore filling coating.

Performance

  • Excellent filling properties
  • Flaking prevention
  • Good adhesion
  • Resistance to cracking and mechanical stress

Technical specifications

Data for BMA Bouche-Pores 1BM-BPW:

ParameterNorm / standardResult
Total Solids, by weight (%) ASTM D125968
Total Solids, by volume (%) ISO 323345
Viscosity at 25 °C (Poises) ASTM D56230
Specific Gravity (g/cm³) ASTM D14751.44
Total Volatile Organic Compound (VOC) (g/L) ASTM D3960425.82
Appropriate solvent —BMA White Spirit
Solvent ratio by volume (%) —20
Gloss level —Matt
Recommended WFT (µm) (2) —60–80
Recommended DFT (µm) (1) —25–40
  • (1) DFT: Dry Film Thickness
  • (2) WFT: Wet Film Thickness

How to apply

Before you start5 °C – 30 °CWell-ventilated area
1Surface preparation

Before applying BMA Bouche-Pores, carry out all necessary pretreatment. The surface should be clean, dry and free of all contaminants (oils, dust, dirt, etc.) to avoid the risk of surface failure. For previously painted wooden surfaces, remove paint residues with a scraper to avoid flaking of the new coating in case it is not compatible with the old one. Sand and smooth the surface, then clean it well and remove the sanding dust. Let the surface dry before any primer or sealer application.

2Priming

Wooden substrates may be primed before applying BMA Bouche-Pores, using any BMA Primer suitable for wood. Priming should be done directly after preparing, cleaning and drying the surface. Alternatively, if the surface is not primed, sand the wood with 080 white sandpaper before application.

3Thinning

If thinning is necessary, add a maximum of 20% BMA White Spirit to obtain the required viscosity of the mixture.

4Application

Apply BMA Bouche-Pores to a well-cleaned, dry, contamination-free surface in a well-ventilated area. The temperature should be between 5 and 30 °C and the humidity no more than 85%.

  1. Apply by brush to an even thickness, then adjust it with a rug.
  2. Maintain a wet edge and lay off in the direction of the grain.
  3. Before staining, the moisture content of the substrate should not exceed 18%.

Drying times

  1. Surface Touch Dry30 min
  2. Thorough Dry2–3 h
  3. Sanding6–8 h

Use it with

The products this coating is specified alongside in the data sheet.

Primer

Any BMA Primer suitable for wood

Any BMA Primer suitable for wood may be used to prime wooden substrates before application.

Thinner

BMA White Spirit

If thinning is necessary, a maximum of 20% to obtain the required viscosity.

View in catalog

Packaging, colors & storage

Packaging1L
ColorsAvailable in White, Walnut, Mahogany, Oak, Ocre, Wenge, and Black.
Shelf life1 year from the manufacturing date.
Storage5 °C – 35 °C, humidity ≤ 85%

Store in undamaged, unopened containers. The product must be kept away from direct sunlight and any sources of heat or flame.

Safety & compliance

Environmental Impact

Contains volatile organic compounds (VOCs); avoid release into the environment. Dispose of in accordance with local environmental regulations. Prevent contamination of soil and waterways.

Health Hazards

Harmful by inhalation, skin contact, and if swallowed. May cause allergic skin reactions, respiratory irritation, or eye damage. Prolonged exposure may affect the central nervous system.

Safety Precautions

Use only in well-ventilated areas. Wear appropriate personal protective equipment (PPE) including gloves, goggles, and a respirator. Avoid direct contact with skin and eyes. Do not eat, drink, or smoke while using the product.

First Aid Measures

Inhalation: Move to fresh air; seek medical attention if symptoms persist. Skin Contact: Wash immediately with soap and water. Remove contaminated clothing. Eye Contact: Rinse cautiously with water for several minutes. Seek medical advice. Ingestion: Do not induce vomiting. Rinse mouth and seek immediate medical assistance.

Certifications

ISO 9001:2015ISO 45001:2018ISO 14001:2015
Technical data sheetTDS 188 · Edition 4
Download PDF
Common questions

Questions about BMA Bouche-Pores

BMA White Spirit, at 20% by volume.

Apply it in a well-ventilated area and at a temperature between 5 °C and 30 °C.

Request a quote for BMA Bouche-Pores

Tell us your project and volumes — our export team replies with pricing and lead times.