BMA Silicone Oil Water Repellent
BMA Silicone Oil Water Repellent is a deep-penetrating, solvent-based silicone oil with water-repellent properties that preserves the natural appearance of surfaces without causing discoloration.
ISO 9001:2015 · ISO 45001:2018 · ISO 14001:2015
What it's used for
BMA Silicone Oil Water Repellent is designed to be used on natural stones.
About BMA Silicone Oil Water Repellent
BMA Silicone Oil Water Repellent is a deep-penetrating, solvent-based silicone oil with water-repellent properties that preserves the natural appearance of surfaces without causing discoloration. It is resistant to weathering and UV radiation and protects surfaces from the effects of high temperatures. It can be applied to cementitious construction materials, natural or molded stone walls, wood panels and painted surfaces to provide effective water repellency.
Performance
- Resistance to weather conditions and UV degradation
- Isolation capacity for more than 5 years
- Protection from heat
- Barrier against chemical and mechanical attack
- Good adhesion
- Non-yellowing
- Long-lasting water repellent
- Easy to apply
- Ready to use
Technical specifications
Data for BMA Silicone Oil Water Repellent 1BM-SIO0001-5
| Parameter | Norm / standard | Result |
|---|---|---|
| Specific Gravity (g/cm³) | ASTM D1475 | 0.789 |
| Spreading Capacity per coat | — | Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting |
How to apply
1Surface preparation
Carry out all necessary pretreatment before applying BMA Silicone Oil Water Repellent. The surface should be clean, dry and free of all contaminants (oils, dust, dirt, etc.) to avoid the risk of surface failure. Remove all deteriorated materials and old paint. Apply the product directly to the surface, working either upward or horizontally, to ensure efficient application.
2Application
Apply BMA Silicone Oil Water Repellent in a well-ventilated area where the humidity does not exceed 85% and the temperature is between 5 °C and 35 °C. Apply on a well-treated, clean and dry substrate using a brush, roller or low-pressure spraying equipment. The product penetrates into the surface. Recoat until the surface is fully saturated with the product.
Packaging, colors & storage
Store in undamaged, unopened containers. The product must be kept away from direct sunlight and any sources of heat or flame.
Safety & compliance
Environmental Impact
Contains volatile organic compounds (VOCs); avoid release into the environment. Dispose of in accordance with local environmental regulations. Prevent contamination of soil and waterways.
Health Hazards
Harmful by inhalation, skin contact, and if swallowed. May cause allergic skin reactions, respiratory irritation, or eye damage. Prolonged exposure may affect the central nervous system.
Safety Precautions
Use only in well-ventilated areas. Wear appropriate personal protective equipment (PPE) including gloves, goggles, and a respirator. Avoid direct contact with skin and eyes. Do not eat, drink, or smoke while using the product.
First Aid Measures
Inhalation: Move to fresh air; seek medical attention if symptoms persist. Skin Contact: Wash immediately with soap and water. Remove contaminated clothing. Eye Contact: Rinse cautiously with water for several minutes. Seek medical advice. Ingestion: Do not induce vomiting. Rinse mouth and seek immediate medical assistance.
Certifications
Questions about BMA Silicone Oil Water Repellent
Request a quote for BMA Silicone Oil Water Repellent
Tell us your project and volumes — our export team replies with pricing and lead times.



